Prosthetic box for pre-made abutments
The prosthetic box for pre-made abutments permits cemented restorations with the One-abutment-one-time technique on all the Shelta implant diameters and Premium ø 3.30 and ø 3.80 mm.
The box contains the pre-made abutment, two fixation screws, a couple of sleeves for prosthesis modeling, a PEEK transfer and a PEEK healing cap. Before ordering the kit, the prosthodontist can choose among three different transgingival heights available of the pre-made abutments, as well as the different height of the abutment itself (4.00 and 8.00 mm) and the type of emergence (straight or anatomical).
Prosthetic box for XA abutments
The prosthetic box for XA abutments permits both cemented and screw retained restorations with the One-abutment-one-time technique on all the Shelta implant diameters and Premium ø 3.80 mm.
The boxes are slightly different. The ones for cemented restorations are available in different diameters and transgingival heights and include the XA pre-made abutment, analogs, transfers and a PEEK cap. The boxes for screw retained restorations, available in a single diameter to enable a significant prosthetic simplification, do not include the XA abutment for direct screwing, whose transgingival height must be chosen and purchased aside from the kit, and is available in two versions: one for single crowns with engaging components and one for bridges and multiple structures with non engaging parts.
